.webp)
Wholesale Gemini Tote Seals
Gemini tote seals are fixed-length, all-plastic seals supplied in matching numbered pairs. They are designed for reusable totes and other compatible containers with two sealing points, allowing both closures to be recorded under the same identifier instead of assigning unrelated numbers to one container. Inspect both tote latches. The thin, flat strap must pass through each opening, and the fixed loop must close without preventing the lid from seating correctly. A matching pair is most useful when both closure points are part of the same control; it does not solve a poor latch fit or a container that can be opened without disturbing the seals. The manufacturer lists a 35-pound break strength for the standard Gemini design, but the exact length, marking and performance should be verified for the ordered product. For single-point, adjustable or barrier alternatives, review truck and security seals. Issue both matching seals to the same tote, apply one at each designated point and record the shared number once with the container ID. At every handoff, verify that both seals are present, both numbers match and neither strap or locking body shows an unexplained change. If either seal is missing or must be replaced, remove the remaining mate and apply a complete new pair unless the written procedure directs otherwise. This preserves a clear two-point record. High-security certifications and regulatory approvals vary by seal; confirm the listed certification for the product when it is required. Many totes have two sealing points. Identical numbers let both closures be associated with the same tote and control record. Use both when the container and procedure designate two controlled closure points. A single seal may leave the second point unmonitored. A complete new matched pair usually creates the clearest record. Follow the written procedure and document why the original pair was removed. No. The tote may be reused, but the seals are one-time-use controls and should be replaced after every authorized opening. Packaging HERO can help you compare tote fit, fixed-loop dimensions, matched numbering and handling procedures.Gemini Tote Seals for Matched Two-Point Closures
Confirm Two-Point Fit Before Standardizing the Pair
Keep Each Twin Pair Together From Issue to Removal
Gemini Tote Seal FAQs
Why are Gemini seals supplied with matching numbers?
Should I use one seal or both?
Can I replace only one damaged seal?
Are tote seals reusable?
Need Help Choosing Gemini Tote Seals?
