.webp)
Industrial Hook & Loop Combo Packs
| Image | SKU | Dimensions | Description | Color/Print | Rolls/Case |
|
Add To Cart | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PH-672017 | 1/2" | Dots | Black | 200 |
|
|
||||||
|
PH-672013 | 1/2" | Dots | White | 200 |
|
|
||||||
|
PH-672001 | 3/4" | Dots | Black | 200 |
|
|
||||||
|
PH-672007 | 3/4" | Dots | White | 200 |
|
|
||||||
|
PH-672025 | 1" x 15' | Strips | Black | 1 |
|
|
||||||
|
PH-672021 | 1" x 15' | Strips | White | 1 |
|
|
||||||
Industrial hook-and-loop combo packs supply corresponding fastening components. Listed choices include 1/2- and 3/4-inch dots packed in black or white and 1-inch by 15-foot black or white strips. The family uses a listed rubber-based adhesive, so surface trials should reflect that exact construction. Dots provide defined contact points without cutting. One-half-inch and 3/4-inch diameters support different footprints, and each dot option is packed at 200 per case. Confirm how the case count relates to matched pairs when calculating the number of finished closures. Keep dot placement symmetrical when the closure needs even engagement. The 1-inch by 15-foot strips allow custom lengths and are sold as one combo pack. Record the cut length and number of fastening points used per assembly so the bond area remains consistent. Trim cleanly without contaminating the adhesive or leaving fibers that interfere with engagement. Black can blend with dark components, while white may be less conspicuous on light surfaces. Clean and dry both surfaces, position the hook and loop sides so they align, then apply uniform pressure to the adhesive backing. Allow any specified dwell before cycling the closure. Uneven engagement reduces useful contact and can place peel force on one edge. Open by separating the fastener faces instead of pulling the adhesive backing away from its substrate. Rubber-based adhesive performance depends on the surface, temperature and exposure. Compare individual hook or loop components when only one side is required. Combo packs are reclosable fasteners, not security seals, structural restraints or guaranteed residue-free mounting products. The combo dots are listed in 1/2- and 3/4-inch sizes. The listed strips are 1 inch wide by 15 feet long. Dots and strips are offered in black or white. Yes. They are intended to provide corresponding hook-and-loop parts. Packaging HERO can help you compare combo dots, 15-foot strips, color and adhesive surface.Matched Hook-and-Loop Combo Dots and 15-Foot Strips
Choose Dots or Cut-to-Length Strips
Test Adhesion and Reclosure
Industrial Hook & Loop Combo Packs FAQs
What dot diameters are available?
What strip format is offered?
What colors are available?
Do combo packs contain mating components?
Need Help Choosing Industrial Hook & Loop Combo Packs?
