Bulk Cable Tie Mounts
Image SKU Dimensions Capacity Color/Print Pieces/Case
Price/Case
1 5
Add To Cart
3/4 x 3/4 PH-449003 3/4" x 3/4" x 3/4" Up to 14", 40lbs. Black 100
$12.74 $12.39
3/4 x 3/4 PH-449007 3/4" x 3/4" x 3/4" Up to 14", 40lbs. Natural 100
$12.74 $12.39
1 x 1 PH-449011 1" x 1" x 1" Up to 19", 50lbs. Black 100
$13.54 $13.17
1 x 1 PH-449013 1" x 1" x 1" Up to 19", 50lbs. Natural 100
$13.54 $13.17
1 1/2 x 1 1/2 PH-449015 1 1/2" x 1 1/2" x 1 1/2" Up to 30", 120lbs. Black 100
$28.51 $27.72
1 1/2 x 1 1/2 PH-449017 1 1/2" x 1 1/2" x 1 1/2" Up to 30", 120lbs. Natural 100
$28.51 $27.72

1 - 6 of 6

Cable Tie Mounts for Defined Routing and Anchor Points

Cable tie mounts create attachment points for routing wire, tubing and lightweight bundles across compatible surfaces. Selection depends on tie width, mount size, attachment method, substrate, environment and installed load—not the tie’s tensile strength alone.

Match the Mount Opening to the Tie

Verify the maximum tie width and thickness accepted by the mount. The available bases accommodate different cable-tie classes, so a mount intended for a standard tie may not accept a wide or jumbo tie. Position the base so the tie can be inserted and serviced after installation.

Do not interpret a compatible tie’s tensile class as the mount’s safe load. The attachment and substrate may be the limiting point. Select compatible ties through cable and security ties.

Prepare the Surface and Validate the Attachment

For adhesive-backed mounts, clean and dry the surface using a method compatible with both the substrate and adhesive. Texture, dust, oil, low-surface-energy plastic, temperature and moisture can reduce adhesion. Allow the specified dwell time before loading.

Use a mechanical attachment where the product provides one and the application requires greater reliability. Test representative installations and inspect them periodically, especially where vibration, heat or outdoor exposure is present. Do not use general cable-tie mounts for life-safety, overhead or code-controlled support unless expressly rated.

Cable Tie Mount FAQs

Will any cable tie fit any mount?

No. Verify the mount opening against the tie width and thickness.

Can adhesive mounts stick to every surface?

No. Substrate chemistry, texture, cleanliness, temperature and exposure all affect attachment.

Does tie tensile strength equal mount capacity?

No. The base, adhesive or fastener and substrate can fail before the tie reaches its listed tensile strength.

When should I use mechanical fastening?

Consider it when the approved mount design, load, vibration, temperature or surface makes adhesive attachment insufficient.

Need Help Choosing Cable Tie Mounts?

Packaging HERO can help you compare tie compatibility, base size, attachment and surface conditions.

Contact Packaging HERO